 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
I.R.I.S. all-weather coatings will beautify your home for
years to come. They will also save you hundreds,
perhaps thousands of dollars in utility costs and repaints.
I.R.I.S. coatings can be applied to any substrate (stucco,
concrete, block, stone, hardboard siding, wood, vinyl,
etc.) and is available in almost any color. We can also
match custom colors.
ThermaPrime
ThermaPrime is an insulating barrier and primer
designed exclusively for use with ThermaShield IRR,
ThermaTex IRR and ThermaFlex IRR. ThermaPrime is
critical to the overall effectiveness of all I.R.I.S. exterior
coating systems.
ThermaShield IRR
ThermaShield IRR is a revolutionary acrylic or
elastomeric coating designed to reflect infra-red (heat)
energy and reduce thermal transfer through substrates.
ThermaShield IRR combined with ThermaPrime may be
used for both residential and commercial applications.
For installation instructions documents .
ThermaTex IRR (Acrylic)
ThermaFlex IRR (Elastomeric)
Our synthetic stuccos are designed to be used with
ThermaPrime and uses the same infra-red (heat)
reflecting technology as our paint and primer system.
These synthetic stuccos are designed for use with
E.I.F.S. or over hard-coat systems (One-Coat Stucco).
years to come. They will also save you hundreds,
perhaps thousands of dollars in utility costs and repaints.
I.R.I.S. coatings can be applied to any substrate (stucco,
concrete, block, stone, hardboard siding, wood, vinyl,
etc.) and is available in almost any color. We can also
match custom colors.
ThermaPrime
ThermaPrime is an insulating barrier and primer
designed exclusively for use with ThermaShield IRR,
ThermaTex IRR and ThermaFlex IRR. ThermaPrime is
critical to the overall effectiveness of all I.R.I.S. exterior
coating systems.
ThermaShield IRR
ThermaShield IRR is a revolutionary acrylic or
elastomeric coating designed to reflect infra-red (heat)
energy and reduce thermal transfer through substrates.
ThermaShield IRR combined with ThermaPrime may be
used for both residential and commercial applications.
For installation instructions documents .
ThermaTex IRR (Acrylic)
ThermaFlex IRR (Elastomeric)
Our synthetic stuccos are designed to be used with
ThermaPrime and uses the same infra-red (heat)
reflecting technology as our paint and primer system.
These synthetic stuccos are designed for use with
E.I.F.S. or over hard-coat systems (One-Coat Stucco).
I.R.I.S. paint and primer system can
like any other conventional paints.
I.R.I.S. stuccos may be applied with
trowel or spray hopper equipment
just like conventional synthetcic
stuccos are.
like any other conventional paints.
I.R.I.S. stuccos may be applied with
trowel or spray hopper equipment
just like conventional synthetcic
stuccos are.
| I.R.I.S. Technical Data Sheets And Material Safety Data Sheets Downloads. |
Application Techniques
ThermaFlex IRR
High Performance Infra-Red Reflective Elastomeric Stucco
Purpose: ThermaFlex IRR is a premium elastomeric synthetic stucco
designed to reflect infra-red heat energy and reduces thermal
transfer through substrates. Designed exclusively for use with
ThermaPrime and may be used in residential and commercial
applications.
Color: 48 standard colors. (Custom colors available).
Packaging: 54lbs or 24.43Kg. (5-gal. plastic pail)
Coverage: Approx. 100-150 sq.ft. (9.2-13.8 m2) per pail when trowel applied.
Coverage will vary depending on substrate surface texture and
application techniques.
Mixing: Mix with a drill mixer for 1 minute or until consistent, prior to use. No
more than 12 oz. of water may be added to this product to aid in
application.
Limitations: Should be applied when surface and ambient temperatures are
between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the surface
may result in product failure.
Application: May be applied by trowel or spray hopper equipment.
Curing: Drying time will vary depending on ambient temperature, humidity
and film thickness.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 Year.
High Performance Infra-Red Reflective Elastomeric Stucco
Purpose: ThermaFlex IRR is a premium elastomeric synthetic stucco
designed to reflect infra-red heat energy and reduces thermal
transfer through substrates. Designed exclusively for use with
ThermaPrime and may be used in residential and commercial
applications.
Color: 48 standard colors. (Custom colors available).
Packaging: 54lbs or 24.43Kg. (5-gal. plastic pail)
Coverage: Approx. 100-150 sq.ft. (9.2-13.8 m2) per pail when trowel applied.
Coverage will vary depending on substrate surface texture and
application techniques.
Mixing: Mix with a drill mixer for 1 minute or until consistent, prior to use. No
more than 12 oz. of water may be added to this product to aid in
application.
Limitations: Should be applied when surface and ambient temperatures are
between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the surface
may result in product failure.
Application: May be applied by trowel or spray hopper equipment.
Curing: Drying time will vary depending on ambient temperature, humidity
and film thickness.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 Year.
ThermaShield IRR
Purpose: ThermaShield IRR is a revolutionary acrylic or elastomeric coating
designed to reflect infra-red heat energy and reduce thermal transfer
through substrates. ThermaShield IRR combined with ThermaPrime
is for use on residential and commercial structures.
Color: 48 Standard colors (Custom colors are available.)
Packaging: 40lbs or 18.15kg (5-gal. plastic pail).
Coverage: Approx. 1000-1500 sq. ft. per pail @ 6-9 wet mils (3-5 dry mils).
Coverage will vary depending on substrate, texture and application
technique. The coverages listed above are a conservative
estimate based on a rough surface (stucco).
Mixing: Mix with a drill mixer for 1 minute or until consistent prior to use.
No more than 16oz of water may be added to this product to aid in
application.
Limitations: Should be applied when surface and ambient temperatures are
between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the surface
may result in product failure. Surface Hardener is
recommended for use on loose or powdery one-coat
stucco.
Application: May be applied by roller, brush or spray equipment. Spray tip
should be 5-17 to 6-23.
Curing: Drying time will vary depending on ambient temperature, humidity
and film thickness. Usually 2-3 hours.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 year.
Purpose: ThermaShield IRR is a revolutionary acrylic or elastomeric coating
designed to reflect infra-red heat energy and reduce thermal transfer
through substrates. ThermaShield IRR combined with ThermaPrime
is for use on residential and commercial structures.
Color: 48 Standard colors (Custom colors are available.)
Packaging: 40lbs or 18.15kg (5-gal. plastic pail).
Coverage: Approx. 1000-1500 sq. ft. per pail @ 6-9 wet mils (3-5 dry mils).
Coverage will vary depending on substrate, texture and application
technique. The coverages listed above are a conservative
estimate based on a rough surface (stucco).
Mixing: Mix with a drill mixer for 1 minute or until consistent prior to use.
No more than 16oz of water may be added to this product to aid in
application.
Limitations: Should be applied when surface and ambient temperatures are
between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the surface
may result in product failure. Surface Hardener is
recommended for use on loose or powdery one-coat
stucco.
Application: May be applied by roller, brush or spray equipment. Spray tip
should be 5-17 to 6-23.
Curing: Drying time will vary depending on ambient temperature, humidity
and film thickness. Usually 2-3 hours.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 year.
ThermaTex IRR
High Performance Infra-Red Reflective Acrylic Stucco
Purpose: ThermaTex IRR is a premium acrylic synthetic stucco is
designed to reflect infra-red heat energy and reduce thermal
transfer through substrates. Designed exclusively for use with
ThermaPrime and may be used in residential and commercial
applications.
Color: 48 standard colors. (Custom colors available).
Packaging: 54lbs or 24.43Kg. (5-gal. plastic pail)
Coverage: Approx. 100-150 sq.ft. (9.2-13.8 m2) per pail when trowel
applied. Coverage will vary depending on substrate surface
texture and application techniques.
Mixing: Mix with a drill mixer for 1 minute or until consistent, prior to use.
No more than 12 oz. of water may be added to this product to
aid in application.
Limitations: Should be applied when surface and ambient temperatures
are between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the
surface may result in product failure.
Application: May be applied by trowel or spray hopper equipment.
Curing: Drying time will vary depending on ambient temperature,
humidity and film thickness.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 Year.
High Performance Infra-Red Reflective Acrylic Stucco
Purpose: ThermaTex IRR is a premium acrylic synthetic stucco is
designed to reflect infra-red heat energy and reduce thermal
transfer through substrates. Designed exclusively for use with
ThermaPrime and may be used in residential and commercial
applications.
Color: 48 standard colors. (Custom colors available).
Packaging: 54lbs or 24.43Kg. (5-gal. plastic pail)
Coverage: Approx. 100-150 sq.ft. (9.2-13.8 m2) per pail when trowel
applied. Coverage will vary depending on substrate surface
texture and application techniques.
Mixing: Mix with a drill mixer for 1 minute or until consistent, prior to use.
No more than 12 oz. of water may be added to this product to
aid in application.
Limitations: Should be applied when surface and ambient temperatures
are between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the
surface may result in product failure.
Application: May be applied by trowel or spray hopper equipment.
Curing: Drying time will vary depending on ambient temperature,
humidity and film thickness.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 Year.
ThermaPrime
Purpose: ThermaPrime is an insulating primer designed synergistically
to be used with ThermaShield IRR, ThermaTex IRR and
ThermaFlex IRR. ThermaPrime is critical to the overall
effectiveness of all I.R.I.S. exterior coating systems.
Color: Light Gray/Off White (Should not be tinted).
Packaging: 45lbs or 20.36kg (5-gal. plastic pail).
Coverage: Approx. 1000-1500 sq. ft. per pail @ 5-8 mils wet (3-5 mils dry).
Coverage will vary depending on substrate surface, texture, and
application technique. The coverages listed above are a
conservative estimate based on a rough surface (stucco).
Mixing: Mix with a drill mixer for 1 minute or until consistent prior to use.
No more than 16 oz. of water may be added to this product to
aid in application.
Limitations: Should be applied when surface and ambient temperatures
are between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the
surface may result in product failure. Surface
Hardener is recommended for use on loose or
powdery one-coat stucco.
Application: May be applied by roller, brush or spray equipment. Spray tip
should be 5-17 to 6-23.
Curing: Drying time will vary depending on ambient temperature, humidity
and film thickness. Usually 2-3 hours.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 year.
Purpose: ThermaPrime is an insulating primer designed synergistically
to be used with ThermaShield IRR, ThermaTex IRR and
ThermaFlex IRR. ThermaPrime is critical to the overall
effectiveness of all I.R.I.S. exterior coating systems.
Color: Light Gray/Off White (Should not be tinted).
Packaging: 45lbs or 20.36kg (5-gal. plastic pail).
Coverage: Approx. 1000-1500 sq. ft. per pail @ 5-8 mils wet (3-5 mils dry).
Coverage will vary depending on substrate surface, texture, and
application technique. The coverages listed above are a
conservative estimate based on a rough surface (stucco).
Mixing: Mix with a drill mixer for 1 minute or until consistent prior to use.
No more than 16 oz. of water may be added to this product to
aid in application.
Limitations: Should be applied when surface and ambient temperatures
are between 45°F and 100°F.
Surface Preparation: Surfaces must be free from grease and excess dust
before applying. Failure to correctly prepare the
surface may result in product failure. Surface
Hardener is recommended for use on loose or
powdery one-coat stucco.
Application: May be applied by roller, brush or spray equipment. Spray tip
should be 5-17 to 6-23.
Curing: Drying time will vary depending on ambient temperature, humidity
and film thickness. Usually 2-3 hours.
Storage: Keep from freezing. Keep out of direct sunlight for prolonged periods.
Shelf Life: 1 year.
Technical Data Sheets & MSDS's
| Warranty Information I.R.I.S. Technologies seeks to inspect every application of our material to maintain the integrity of authorized applicators and I.R.I.S. Technologies LLC and the customers specifications, a warranty certificate will be issued. Every dry mil of coating applied is given a year warranty. Five mils, 5 years. Ten mils, 10 years. The thickness of the coating may be specified by the customer. The quantity of coating required for the final desired coating thickness will be calculated by an I.R.I.S. Technologies representative from a measurement of the exterior area of your home. I.R.I.S. Technologies is not responsible for product failure due to insufficiently prepared surfaces. Contact us for additional warranty information. |
 |
I.R.I.S. Technologies, LLC.
11324 West Orchid lane.
Peoria, AZ. 85345.
Sales & Marketing: (623) 256-0648
Technical Service: (602) 619-2215
E-mail: info@iristechnologies.biz
11324 West Orchid lane.
Peoria, AZ. 85345.
Sales & Marketing: (623) 256-0648
Technical Service: (602) 619-2215
E-mail: info@iristechnologies.biz
 |
| I.R.I.S. Technical Data Sheets And Material Safety Data Sheets Downloads. |
I.R.I.S. Products Overview
